iPhone 6 爆Monitor 維修

28-Feb-2015 今日跌爆左個iPhone 6以下是維修時需知，價錢及程序!  跌爆Monitor當日好急，返左屋企做完Backup即刻就去左Retail Store，點知排隊都只係做Booking預約，約左2-Mar-2015。
2-Mar-2015 預早11:55己經去到Apple Store，姐姐仔來幫我登記及料解情況，其實視乎損壞情況啦，因為隨爆Mon外，機身多處位置都花了，如果沒有存貨可更換手機的話，我就換Mon算啦，適逢有貨所以俾$2368成部換左去，當然換機佢一定唔係俾賣街packing的iPhone你，佢係俾維修更換用packing的iPhone，即係Apple佢地認證過全新或番新既iPhone，呢點大家要留意因為係番新所以要驗清楚，收左貨出左門口有問題你行返入去佢唔會換俾你，只會做維修，我收到第一部機即彈，Screen內有一粒黑點的塵，第二部才收貨。

 維修程序
   
- 先致電Apple Support預約維修 iPhone, 如果你 Walk-in 去Apple Shop除非冇人做維修啦，如果唔係你去到就係排隊做booking.

- 如果手機仲可以開到機請先用電腦 iTunes把 iPhone Backup一次先，如果你平時做開個Backup就好快攪掂，如果你從來冇做過，個backup可能要做1-2個鐘視乎你有幾多Data。#註1

- 預約好日期維修當天需準時到Apple Retail Store 交付手機驗查及報價，維修約需時48小時，如更換手機則視乎存貨，有存貨可以即時更換，費用一般如下 :

以下是保養期內意外跌爛iPhone Monitor Screen費用
$848 更換 iPhone Screen (如iPhone Case灣曲導致不能更換Monitor Screen則需整部手機更換。
$2368 更換整個 iPhone 手機 (注意是維修用的全新或番新iPhone，包裝與零售版本不同)
$868及$2368基本上係與保養無關，即係買機到手未滿7天／未滿一年／過晒保養都係呢個價錢，因為跌爛並唔係本身機件問題，係人為損壞。
$548 更換整個 iPhone 手機 (只限 AppleCare+)
*** 任何並非人為損壞Apple保養是包含在內的，如果你的iPhone是明顯坐灣左，應該係計算在人為損壞，如果好輕微灣曲如玉眼不能分辨出來，我個人認為可以懶產品質量問題要求維修或更換，iPhone內多處位置都有試水紙，如因入水導致損壞係講唔過的。

 - 維修或更換完手機回家用iTunes restore backup便可以還原所有資料。


 (以上係2015年我更維修iPhone6價錢參考好啦)



AppleCare Plus
如果你係全新手機及購買未滿60天，你可以購買額外既AppleCare+ $688 , 需另外俾$548元意外保障就可以更換成部手機，但只限兩次！抵唔抵就視乎你點玩，如果你係裸跑朋友，我建議買機時一定要買埋AppleCare+，裸跑一至兩年部機一定由頭花到尾，介時換其他手機想把現有手機乾乾淨淨俾屋企人用俾多$548就ok, 或你有心理準備一定跌爛AppleCare+一定抵D。

 *** 注意必需在購買手時一拼購買或購買後60天內到Retail Store購買，Retail Store會驗查你購買紀錄及驗查手機沒有損壞才能成功購買。

#註1
關於備份，所有的備份是不會儲存密碼的，當回復手機後，電郵帳號，Wi-Fi密碼等等都需要重新輸入密碼，另外App內的設定大部份都會同備份前相同，但如果是Game的話如Chain Chronicle是必需用引繼才可以取回帳號，其他如Puzzle & Dragon則可以放心備份回復。

How to setup Linux/ABC e-mail account to your iPhone's

1. Click "Setting" on your iPhone's

2. Click "Mail, Contacts, Calendars"

3. Click "Add Account" and click "Other"

<<<<<<<<<<<<<<





4. Click "Add Mail Account"

 <<<<<<<<<<<

















5. Enter the following information :

Name :   << This is sender name >>
E-Mail :   << Enter your e-mail address >>
Password :   << Enter your password >>
Description :    << This is name for display your mail account >>, check the right side picture!

6. You need to choice which mode do you want to connect with e-mail account

Please enquire your administrator which mode is better for you, but I will suggest using POP.

The following screen you only need to care the Incoming & Outgoing Mail Server :
Incoming Mail Server Host Name is : mail.abchk.com or mail.asa.com.hk or mail.yourdomain.com
Outgoing Mail Server Host Name is : smtp.abchk.com or smtp.asa.com.hk or smtp.yourdomain.com

P.S. Some time when you click "SAVE" it will wait a long time to validation of your account setting, just wait it.



7. After add the account, you should click to the mail account for checking SMTP setting.

<<<<<















8. Click "SMTP"

<<<<<<<<<<<






9. Click the Primary Server "smtp.abchk.com"

<<<<<<<<<<



















10. Make sure your outgoing mail server setting have username and password, and server port must using 465, if server port is 25, sometime you can sent out e-mail, but i guess will always fail, depend on your existing internet connection, because most ISP will block the Port 25 for outgoing mail services.














<<<< 465

How to setup Exchange Online / Office 365 e-mail account to your iPhone's

Remark : If you are using Andriod Phone and it can't automatically discovery the setting, please click here to follow the instruction complete your setting.

1. Click "Setting" on your iPhone's

2. Click "Mail, Contacts, Calendars"

3. Click "Add Account"



4. Click "Exchange"

5. Enter your e-mail address, password and description.
Description is what name you want to display on Mailboxes list, check right side picture, such as "iCloud" & "MYS"

6. You can enable what function you need.




















7. Check this picture, you will see "MYS" seperate on upper and down side, the difference is upper only show inbox and latest e-mail only, down side will connect to Exchange Online/Office 365 server and show all e-mail and folder

SQL Error 1814 / Change tempdb path / How to start SQL Server if you lost TEMPDB Data files?

Source from : http://blogs.xtivia.com/home/-/blogs/how-to-start-sql-server-if-you-lost-tempdb-data-files-

Following are the steps needed to add a new file to TEMPDB and then restart SQL Server.

1)   Open command prompt window #1 as ADMIN and go to the BINN directory where SQL Server is installed. This is typically in

 

C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn

OR

C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn

 

2) Then execute command like

       Sqlservr.exe /f /c  

3)   Then open one more command window #2 and if this is a default instance then open SQLCMD  using the following command

SQLCMD –S localhost –E

4)   This will open a SQL command prompt there where you can type the following commands

      

1> USE MASTER

2> GO

3> ALTER DATABASE tempdb MODIFY FILE

4> (NAME = tempdev, FILENAME = 'd:\tempdb\tempdb.mdf')

5> GO 

6> ALTER DATABASE tempdb MODIFY FILE

7> (NAME = templog, FILENAME = 'd:\tempdb\templog.ldf')

8> GO 

9> quit

5)   Now go back to Command window #1 and hit CTRL C.

It will ask if you want to stop the instance. Y/N.
Enter Y, Please close all Command Prompt before start the services

6)   Now start the SQL Server instance from configuration manager. You should see the new data file created and SQL Server started.

Microsoft 推出緊急補丁修補 Windows Server 嚴重漏洞

https://technet.microsoft.com/library/security/MS14-068

黑客搖身一變網域管理員

Microsoft 指，是次修補的漏洞編號為 CVE-2014-6324，將允許黑客攻擊 Windows 網域，由遙距升級獲取使用者權限，繼而藉此得到網域上任何帳號的權限，當中包括網域管理員帳號，令黑客由沒有權限的用戶搖身一變成為網域管理員。

受影響的軟件包括 Windows Server 2008R2 以下版本的網域控制器、Windows Server 2012 以上版本最為嚴重；Windows Server 2003、Windows Server 2008、Windows Server 2008 R2、Windows Server 2012 及 Windows Server 2012 R2 的安全風險均為嚴重。而 Server 2012 以上各版本的網域控制器亦非完全安全，但風險相較之下則較為低。

轉自 : UNWIRE.PRO
http://unwire.pro/2014/11/19/windows-server-kerberos/

USB Problem

http://windows.microsoft.com/en-us/windows-vista/tips-for-solving-problems-with-usb-devices

Gmail 設定自動回覆郵件

Step 1. 

 - 登入到 Gmail 網頁 https://mail.google.com/

 - 出現下圖, 點選 "選項" 按鈕及選擇 "設定"

選擇 "設定"

 Step 2.

 - 第一頁的 "一般設定"  最低的部份是休假回覆, 先click "開啟休假回覆" , 選擇第一天休假的第一天及最後一天, 輸入主旨及回覆內容, 最後記得儲存變更

Remark : 只要設定好日期, 就可預先開啟休假回覆!!